Fire Alarm Panels Mall Fire Alarm Panels is the central element of any fire alarm system. All devices (detectors, call points, sounders, etc.) are connected to the fire panel, which typically provides power to them and information is relayed back and forth to determine whether there is a fire and if so activate an appropriate warning. Fire Alarm Control Panels is a four-zone Fire Alarm Control Panel designed for low-cost fire alarm systems. Alarm Control Panels supports Smoke Detectors, indicating Manual Call-Points (MCP) and indicating heat detectors, and has the facility to internally mount one or two 20 Watt evacuation amplifiers. Fire Alarm Control Panels provides an option for brigade connection and complies with the requirements of NZS 4512:2010, and the New Zealand Building Code. Fire Alarm Control Panels specification Normal’, ‘Defect’ and per circuit ‘Fire’ indication on front panel Internal Bell Cut-Off’ and ‘External Bell Cut-Off’ (BCO) Alarm reset available from a front panel key-switch Trial Evacuation key-switch Fire & Defect C/O relays with Fire relay Isolate switch Automatic Alarm Verification Facility (AVF) provides substantial protection against transient false alarm activation Supervised bell circuit with 10 kΩ EOL resistor Maximum of two 20 Watt 100 Vrms line amplifiers with voice evacuation message ‘Battery Absent’ detection circuitry Earth leakage supervision Integrated Alarm and Defect piezo for audible warning On-board System ‘Defect’ LED indicates source of fault Door Interlock Brigade ‘Isolate’ and ‘Test’ switches Electrically isolated interface to an a
